Chengdu Lingluo-Tech Co., Ltd.

LRS-35W

Short Description:

·Universal AC input/Full range
·Withstand 300VAC surge input for 5 second
·Miniature size and 1U low profile,low weight
·Protections:Short circuit/Overload/Over voltage
·Cooling by free air convection
·No load power consumption<0.5W
·Operating altitude up to 5000 meters(Note6)
·LED indicator for power on


  • Logistics Costs: Negotiation
  • Min.Order Quantity: 2/Pieces
  • Supply Ability: 50000 Piece/per Month
  • Product Detail

    Product Tags

    LRS-35W series Ultra thin single switching power supply

    Features:

    ·Universal AC input/Full range

    ·Withstand 300VAC surge input for 5 second

    ·Miniature size and 1U low profile,low weight

    ·Protections:Short circuit/Overload/Over voltage

    ·Cooling by free air convection

    ·No load power consumption<0.5W

    ·Operating altitude up to 5000 meters(Note6)

    ·LED indicator for power on

    ·100% full load burn-in test

    ·High efficiency,long life and high reliability

    ·3 years warranty

    Model LRS-35-5 LRS-35-12 LRS-35-15 LRS-35-24 LRS-35-36 LRS-35-48
     

     

    output

    DC voltage 5V 12V 15V 24V 36V 48V
    Rated current 7A 3A 2.4A 1.5A 1A 0.8A
    Current range 0~7A 0~3A 0~2.4A 0~1.5A 0~1A 0~0.8A
    Rated power 35W 36W 36W 36W 36W 38.4W
    Ripple&noise 100mVp-p 120mVp-p 120mVp-p 150mVp-p 200mVp-p 200mVp-p
    DC voltage ADJ. range ±10% ±10% ±10% ±10% ±10% ±10%
    Voltage toleranceNote.3 ±3% ±2% ±1% ±1% ±1% ±1%
    Line regulationNote.4 ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5%
    Load regulationNote.5 ±2% ±1% ±0.5% ±0.5% ±0.5% ±0.5%
    Setup,rise,hold up time 800ms,30ms,30ms/230VAC(full load)
     

    input

    Voltage range 90~264VAC,127~373VDC
    Frequency range 47~63HZ
    AC current 0.7A/115VAC 0.42A/230VAC
    Inrush current Cold start 45A/230VAC
    Efficiency 83% 86% 87% 88% 89% 90%
    Leakage current <0.75mA/240VAC
    protection overload Rated output power110%~150% start over load protection
    protection type:hiccup mode,auto-recovery after fault condition is removed
    Over voltage Rated output voltage 115%~135% Start over voltage protection
    Protection type:hiccup mode,auto-recovery after fault condition is removed
    environment Working temp,humidity -30℃~+70℃(Please refer to“derating curve”)
    20%~90%RH Non-condensing
    Storage temp,humidity -40℃~+85℃,10%~95%RH non-condensing
    Withstand vibration 10~500HZ,2G10min/1cycle,period for 60 minutes,each axes
    safety Withstand voltage I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:1.25KVAC
    Isolation resistance I/P-O/P,I/P-FG,O/P-FG:100Mohms/500VDC
    Fit standard Safety standards Compliance to UL60950-1,TUV EN60950-1,GB4943
    EMC emission Compliance to EN55032(CISPR22)Class A,GB9254 Class B,EN55014,EN61000-3-2,3
    EMC immunity Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024,EN61000-6-1
    others Dimension 99*82*30mm(L*W*H)
    Weight/packing 0.23kg/60pcs/14.8kg/0.025m³/0.88CUFT
    MTBF ≥720K hrs min. MIL-HDBK-217F(25℃)
    note 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃of ambient temperature.2. Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.

    3. Tolerance : includes set up tolerance, line regulation and load regulation.

    4.Line regulation is measured from low line to high line at rated load.

    5.Load regulation is measured from 0% to 100% rated load

    6.The ambient temperature derating of 5℃/1000 m is needed for operating altitude greater than 2000m(6500ft)

    7.The power supply is considered as a component which will be installed into a finalequipment.The final equipment must be re-confirmed that it still meets EMC directives.For guidance on how to perform these EMC tests.


  • Previous:
  • Next:

  • Related Products